Lift Studio — 3D Crane Lift Planner

3D view unavailable

Your browser or device doesn't support WebGL. The lift calculations and export still work — use the controls.

Lift parameters

What are you lifting?

Load weight

Type of lift

Rigging gear

Select rigging (Ctrl/⌘-click for multiple). If none selected, weight is estimated. WLL shown are nominal — verify the actual sling angle on site (<60° reduces WLL).

Sling included angle °

Sling legs

Lifting radius

3 m40 m

Drag the load in the 3D view, or type the radius here.

Ground / supporting surface

Indicative allowable bearing pressure — confirm with a geotech report.

Subgrade CBR 4.0%

From a geotech report / DCP. Sizes the crane pad. ≈ 300 kPa allowable. Verify with a geotechnical engineer / RPEQ.

Site / context

Weather & visibility (wind / night shift)

Wind speed m/s

Gust wind speed m/s

Wind from

Crane / load wind limit m/s

Wind on load

Projected area m2

Auto

Drag factor Cd

Lightning Rain Wet ground Poor visibility

Visibility profile

Visibility distance m

Work lights Floodlights Beacons Headlights

Dogger, taglines & exclusion (SWMS/JSA)

Doggers / riggers

Lead dogger / tagline lead

Dogger / rigger ticket

Spotters

Public interface Blind spots Services / obstructions

Taglines

Count

Length m

Manual load exclusion radius m

Public/traffic interface Blind lift

Communications

Radio channel

Backup

Project & sign-off (for the lift plan)

Project / job

Location

Prepared by

Crane operator (HRWL)

Dogger / rigger (HRWL)

Lift supervisor

Reviewed / approved (competent person / RPEQ)

Capacity check

SAFE

—

Select a crane and load

Rated @ radius: — t
Gross load: — t
Rigging: — t
Margin: — t

Ground & outriggers indicative

—

Crane pad / working platform —

—

Weather & visibility -

Dogger / tagline controls -

⚠ Indicative only — representative load charts. Verify every lift against the manufacturer's certified chart and a competent person / RPEQ (AS 1418 / AS 2550). Crane-pad / working-platform sizing is a planning estimate (TWf method) — the platform must be designed & certified by a geotechnical engineer / RPEQ.

Indicative planning visualisation only. Load charts are representative — verify every lift against the manufacturer's certified chart and a competent person / RPEQ.

Choose crane

Lift parameters

Capacity check

Load chart